ABSTRACT
The wireless communication system very essential technology and have significant use after corona virus effect the world very badly. The Wi-Fi technology exhibits good wireless communication to provide internet facility but suffers with low antenna gain. This novel array proposed method with different dielectric material properties is used to enhancement the gain of the Wi-Fi antenna. The operating frequency of the proposed antenna is at 2. 5GHZ. This proposed method consist of Teflon dielectric material with dielectric constant of 2.02 has the gain of 8.4dbi, return loss of -30db and VSWR is 1.85, with loss tangent 0.0002. This proposed method compares with different dielectric material like kapton and fr-4 substrate but Teflon exhibit the good results. This proposed method work good for PCB antennas and flexible and wearable antennas with kapton substrate. © 2022 IEEE.
ABSTRACT
This paper presents a novel unique single-layer dual-polarized microstrip patch antenna array with a COVID-19 shape designed for building a Base Station (BS) for sub-6 GHz applications at the resonant frequency 3.16 GHz. Furthermore, it is easy to fabricate and compact, which makes it suitable for 5G applications. Firstly, a single-element fractal shape antenna with a gain of 3 dB is discussed. Secondly, an 8-element 2x4 antenna array is designed with a gain of 8 dB. The antenna is fabricated using an FR4-epoxy double-sided copper board with a thickness of 1.6 mm. It is optimized by performing parametric studies of the dimensions using the finite element method (FEM) software program HFSS. The printed prototype measurements including S-parameters, polarization, and radiation pattern show a good agreement with simulation results. © 2022 IEEE.
ABSTRACT
In recent years monetary narrowing impact more on Turkey and developing countries. Therefore, the importance of industrial policy and technology management in developing countries has widely increased. Production and design strategies have to be planned carefully. Thus, evidently monetary narrowing and undesired exchange rate fluctuation affected investment and the cash flow in numerous sectors such as finances, funding, industry, service industry, agribusiness, livestock, building trade, research, and development, etc. In this context, this situation broadly hit the research, prototyping, manufacturing, and testing phase of the microstrip patch antennas. Today, patch antennas have widely utilized in telecommunication systems. Hence, this growth has increased interest in studies. As it is in every project, cost and efficiency are an essential part of the project design. Therefore, the ratio of cost is more important for Turkey and developing countries due to undesired exchange rate fluctuation, tax, financial obligations, and unexpected world events (e.g. COVID-19 pandemic). Commonly, the microstrip patch antenna comprises particular parts such as a radiating patch on top of the double-sided laminate and ground plane and feeding point located below the double-sided laminate. Therefore, microstrip patch antenna components play a significant role in patch antenna radiation characteristics. Moreover, specifications of the double-sided laminate, such as relative permittivity (or dielectric constant) and real physical thickness are essential elements of the patch antenna's radiation characteristics. Generally, high-quality dielectric substrates are developed and manufactured by western originated companies. Thus, the dielectric substrate with high-grade characteristics is hard to find for Turkey and developing countries. Importing is the only option and quite costly. Choosing a domestic dielectric substrate is inevitable, however insufficient for many cases. In this study, difficulties in microstrip patch antenna production and prototyping in Turkey are analyzed.
ABSTRACT
In this paper, a 5G on-body patch has been designed for detecting COVID-19 affected lung. A new material Single Wall Carbon Nanotube (SWCNT) is used to design the patch of the antenna. Copper is used to designing the ground and FR-4 (lossy) is used in the substrate. The antenna has a total thickness of 5.5 mm where the patch thickness is 0.5 mm, the substrate thickness is 4.5 mm, and the ground thickness is 0.5 mm. The total volume (length x width x thickness) of this antenna is 80 mm x 80 mm x 5.5 mm (35200 mm3). For detecting COVID-19, designed two human lung phantom body models such as a COVID-19 affected lung model and a non-affected normal lung model. The patch antenna and all the models were designed in CST Microwave Studio. All the dielectric properties and other valuable parameters of the antenna materials and lung phantom models were collected and used for designing the antenna and phantom lung models. The antenna's return loss (S1,1) is -27.498894 dB, gain is 3.007 dB, VSWR is 1.0880641, directivity is 6.007 dB, resonant frequency is 6.296 GHz, SAR 1.19 W/Kg, bandwidth is 1.8174 GHz and the efficiency is 61% in free space. In this pandemic situation, this antenna can be given a new step for detecting COVID-19 affected lung. © 2022 IEEE.
ABSTRACT
This paper presents a novel unique microstrip fractal patch antenna with a COVID-19 shape designed for wireless applications. The COVID-19 antenna is a compact, miniature size, multiband, low weight, and low-cost patch antenna;the demonstrated patch antenna, simulated using the HFSS software program, consists of a circular printed patch with a radius of 0.4 cm surrounded by 5 pairs of crowns. The antenna is implemented on a double-sided copper plate with an FR4-epoxy substrate of 1 × 1 cm2 area and 1.6 mm thickness. This small patch operates and resonates on two frequencies 7.5 GHz and 17 GHz within C and Ku bands, respectively. The simulated and measured gains were respectively 0.8 dB and 0.2 dB at the lower frequency and 2.21 dB and 2 dB at the higher frequency. A coaxial probe feeding method is used in the simulation, and printed prototypes showed excellent consistency between measured and simulated resonance frequencies. © 2022, Electromagnetics Academy. All rights reserved.
ABSTRACT
PurposeIn this work, a microstrip antenna array for wireless power transfer (WPT) application is reported. The proposed 4 × 4 antenna array operating at 16 GHz is designed using a flexible Kapton polyimide substrate for a far-field charging unit (FFCU).Design/methodology/approachThe proposed antenna is designed using the transmission line model on a flexible Kapton polyimide substrate. The finite element method (FEM) is used to perform the full-wave electromagnetic analysis of the proposed design.FindingsThe antenna offers −10 dB bandwidth of 240 MHz with beam width and broadside gain found to be 29.4° and 16.38 dB, respectively. Also, a very low cross-polarization level of −34.23 dB is achieved with a radiation efficiency of 36.67%. The array is capable of scanning −15° to +15° in both the elevation and azimuth planes.Originality/valueThe radiation characteristics achieved suggest that the flexible substrate antenna is suitable for wireless charging purposes.